Home to CAN-bus

CAN-bus Analyzer and Recorder
CANREC Over-Length Data and Waveform Recording Analyzer|CANScope CAN Bus Analyzer |CANalyst Application Protocol Analysis Tool |
Industrial CAN Card and Converter
CAN Card for USB|Ethernet-to-CAN module|CAN Card for PCI|WiFi to CAN Module|CAN Card for CPCI Interface |Serial Port to CAN Module|CAN Card for PCIe Interface|CAN Card for MiniPCIe|
CAN Network Expansion and Protection
Isolation gateway switch|CAN Fiber Converter|Fault tolerant CAN conversion board|Connector and lightning protector|
CAN Data Acquisition Module
CANopen protocol module|iCAN protocol module|
CANopen and DeviceNet Protocol Device
CANopen Master Card Series|CANopen slave module|DeviceNet master card|DeviceNet slave module|
CAN Teaching and Experimental Development Platform
CANOpenEDALab teaching and scientific research platform|iCAN teaching and experimental development platform|

Specifications

  • CAN interface: OPEN interface mode (CANH, CANL).
  • The CAN channel is provided with electromagnetic isolation and DC/DC power isolation. and the isolating voltage is 2500VDC.
  • EMC level of CAN interface: contact discharge ± 8KV, group pulse ± 2KV.
  • The fiber is a single-mode fiber with SC interface.
  • Maximum frame traffic: more than 6000 frames/ second for single channel (1M Baud rate, extended data frame).
  • It supports CAN2.0A and CAN2.0B protocols and conforms to ISO/DIS11898-1/2/3 standards.
  • Programmable CAN Baud rate in the range of 5Kbps～1 Mbps.
  • Programmable fiber Baud rate in the range of 5Kbps~ 800Kbps.
  • The CAN interface can be equipped with built-in 120Ω terminal resistance and connected to R+ and R- terminals.
  • Installation method: standard DIN guide-rail mounting or simple fixation.
  • It can be used in an environment with explosion-proof requirements.
  • Operating voltage: +9V~+ 26V.
  • Operating temperature: - 40℃~ + 85 ℃.
  • Storage temperature: - 40℃ ~ + 85 ℃.
  • Physical dimensions: 118mm* 83mm * 26 mm.